• 手机:15552522412
  • 邮编:250100
  • 联系人:张经理
  • 手机:15552895737
  • 地址:济南市历山路
新闻中心当前位置:首页-新闻中心
    污水池清理的流解析
    2015-12-09 16:32:28 http://www.sggdst.com
    1、关闭污水池进水阀,挂牌标识;
    1, close the sewage pool inlet valve, the listing marks;
    2、确保维护人员的生命安全,必要时做好通风给氧和定时更换作业人员。
    2, to ensure the maintenance of life and safety, the need to do a good job of ventilation to oxygen and time replacement workers.
    3、抽干污水池内的污水;
    3, drainage of sewage sludge;
    4、稀释污泥。使用高压泵冲稀污泥。清理池底淤泥、杂物,将从污水池中清出的淤泥找空地堆放、晾晒,最终将淤泥运走;
    4, diluted sludge. Use of high pressure pump diluted sludge. Clean the bottom mud and debris, will be cleared from the sewage in the mud tank to find space stacking, drying, sludge will eventually;
    5、注入清水进行冲洗并及时抽出,至污水池清洁为止;
    5, injection water for flushing and timely extraction, to the waste water tank clean up;
    6、在污泥稀释前,用吸污车反复冲,待污泥被稀释后,开启抽污设备,污泥通过管道吸出,放入准备好的泥浆车内运走。避免对环境造成二次污染;
    In 6, the sludge dilution before use, sewage suction truck to be repeatedly washed, sludge was diluted sewage sludge by opening pumping equipment, pipe suction into the prepared slurry inside the car. Avoid environmental pollution caused by two;