• 手机:15552522412
  • 邮编:250100
  • 联系人:张经理
  • 手机:15552895737
  • 地址:济南市历山路
新闻中心当前位置:首页-新闻中心
    高压水射流清洗的优势有哪些?
    2015-12-03 16:30:45
    清洗质量高:清洗管道及热交换器等设备时,能将管内外结垢物和堵塞物全部剔除干净,可见到金属本体,实现高质量清洗。
    High cleaning quality: cleaning pipes and heat exchangers and other equipment, can be inside and outside the tube fouling and blocking all the cleaning, visible to the metal body, to achieve high quality cleaning.
    不腐蚀金属:不用酸碱等腐蚀剂,所以没有化学腐蚀;利用水射流高速能剥离粘结物,但剥离不了金属结构故无机械腐蚀。
    Non corrosive metal: no acid or alkali and other corrosive agents, so there is no chemical corrosion; the use of high speed water jet can peel off the bond, but not the metal structure can not be stripped without mechanical corrosion.
    清洗速度快:由于水射流(国外亦水弹)的冲刷、契劈及消磨等作用,可立即将垢物打碎脱落。它比传统的化学方法、喷沙抛丸方法、简单机械及手工方法清洗速度快几倍到几十倍。
    Cleaning speed: due to the water jet (abroad is also a water bullet) of the erosion, wedge and kill the role, can immediately break off the scale. It is the traditional chemical method, sandblasting, shot blasting method and manual method of simple mechanical cleaning speed several times to several times.
    应用范围广:水射流可清洗全堵塞、半堵塞、周边和表面结垢的各类管道和设备.清洗垢物可为盐碱结垢物、杂质堵塞物、油脂粘结物、混合沉淀物及漆锈结合物等.凡是水射流可直射的部位皆可清洗.
    Wide range of applications: water jet can clean all kinds of pipes and equipment, which can be cleaned by water jet, semi plug, peripheral and surface dirt.
    无环境污染:水射流清洗不象喷沙抛丸、机械清洗那样,产生大量粉尘污染大气环境,损害人体健康。也不象化学清洗那样,产生大量酸碱废液,污染城市、河道、土质和水源。高压水射流清洗可使由其它清洗方法产生的大气粉尘降低到国家规定的安全标准以下,消除酸碱废液的排放,在我国环保事业上是一项重要举措。
    No environmental pollution: water jet cleaning not like sandblasting polishing, mechanical cleaning, generate a lot of dust pollution of atmospheric environment, damage to human health. Nor does it produce a large number of acid and alkali waste water, such as chemical cleaning, pollution, river, soil and water. The high pressure water jet cleaning can reduce the air dust produced by other methods to the safety standard of the state. It is an important measure to eliminate the waste acid and alkali waste water.