全国服务热线
15552522412 
联系我们
济南圣果清洁服务有限公司

联系人:田经理

联系电话:15552522412 

网址:http://www.sggdst.com

地址:济南市天桥区北园大街248号二楼西侧间

当前位置: 首页 > 新闻中心 > 行业资讯 >

清理隔油池需要哪些步骤?

来源:http://www.sggdst.com  发布时间:2021-08-20 15:25:53

清理油分离器
Clean the oil separator
沉在隔油池中的重油和其他杂质积聚在底部污泥斗中,通过排泥管进入污泥管。隔油废水排入排水沟,排出池外进行后续处理,去除乳化油等污染物。
Heavy oil and other impurities settled in the oil separator accumulate in the bottom sludge hopper and enter the sludge pipe through the sludge discharge pipe. The oil separation wastewater is discharged into the drainage ditch and discharged outside the tank for subsequent treatment to remove emulsified oil and other pollutants.
下面简单介绍一下如何清洗油分离器池。
The following is a brief introduction to how to clean the oil separator tank.
在清理隔油池前,在现场安装警示或防护装置;
Install warning or protective devices on site before cleaning the oil separator;
济南管道疏通
池内排放时应进行通风和有毒气体试验。
Ventilation and toxic gas test shall be conducted when discharging in the tank.
打开隔油池盖通风10-15分钟。不要携带火种或呼叫隔油池侧面,以免引起火灾和爆炸。
Open the oil separator cover for ventilation for 10-15 minutes. Do not carry fire or call the side of the oil separator to avoid fire and explosion.
用工具将隔油池表面固化的油垢挖出来,或启动吸油车将油箱内的污水抽出来,直至化油器被吸上来。
Dig out the solidified oil dirt on the surface of the oil separator with tools, or start the oil suction truck to pump out the sewage in the oil tank until the carburetor is sucked up.
清理油分离器中的油污和废弃物,放入桶内,按要求回收。
Clean up the oil stain and waste in the oil separator, put it into the barrel and recycle it as required.
隔油池清洗完毕后,检查池内是否有浮沙,进出口是否畅通。
After cleaning the oil separation tank, check whether there is floating sand in the tank and whether the inlet and outlet are unblocked.
盖好油箱盖,清理工具,清理工作现场。
Cover the oil tank cover, clean the tools and clean the work site.